Hold down Side strap kit

Prevents the awning and awning tent from damage due to high winds or storms (flying up). Thule has developed new unique attachments. These attachments are simple to install on all Omnistor awnings. Two heavy straps, connected to the ends of the support legs, secure the awning or tent. The complete kit can easily be stored inside the supplied storage bag.

Not for Caravan Style and Omnistor 2000.

Hold-Down kit

Prevents the awning and/or Safari-Room from flying up.
Length 11 meter, suitable for all awnings up till 6,00m.
Storage bag included.

Tension rafter

series 5 & 6
tension rafter for awning and Safari-Room
series 5: 2,00m - 2,25m - 2,50m - 2,75m
series 6: 2,00m - 2,50m - 2,75m
tension rafter for Caravan Style 2,30m

Rain-Blocker Front

Non transparent, water and wind resistant PVC fabric.
height: always 1,40m
length: 2,40m - 2,80m - 3,30m - 3,80m - 4,30m - 4,80m

Sun-Blocker Front

Panel in see-through screen fabric that lets the light in, but protects you from the heat.
height: always 1,40m
length: 2,40m - 2,80m - 3,30m - 3,80m - 4,30m - 4,80m

Sun-Blocker side

Side panel in see-through screen-fabric for series 5 awnings.
projection: always 2,50m
mounting height:
medium (2,20m to 2,39m)
or large (2,40m to 2,60m).

Rain-Blocker side

Easy-to-use PVC side panel with window. Can be used on both left and right hand side.
RBS 250
x-small, height 1,80m - 1,99m, projection 2,50m
medium, height 2,20m - 2,39m, projection 2,50m
large, height 2,40m - 2,60m, projection 2,50m
extra large, height 2,61m - 2,80m, projection 2,50m

RBS 275
medium, height 2,20m - 2,39m, projection 2,75m
large, height 2,40m - 2,60m, projection 2,75m
extra large, height 2,61m - 2,80m, projection 2,75m

for Omnistor Caravan 230 / Style:
medium, height 2,20m - 2,39m, projection 2,20m

for Omnistor Caravan:
medium, height 2,20m - 2,39m, projection 2,00m

for Omnistor 2000 (for installation on VWT4) :
x-small, height 1,80m - 1,99m, projection 2,00m

220Volt motor

The Omnistor 8000 is available with built-in 220V motor with emergency operation.
This motor is available as option for an awning without motor.
The awning will not be longer with motor.

Motorkit for Omnistor 8000

Easy connection to 230V (or 12V inverter).
Retrofit possible.
With remote control.

A retro fitted motor kit accessory has been developed especially for the Omnistor 8000. An awning that has already been installed can be retro fitted with an integrated 230V motor with remote control without a problem.
The motor of the Omnistor 8000 has an emergency control, hidden in the end caps, to ensure that the awning can be operated at any time, even in a power interruption.

LEDs for Omnistor 8000

Create that special atmosphere by installing LED lighting on the inside lead rail of your Omnistor 8000 awning. LED lights have a longer life span and also consume lower levels of electricity.

Supply: 12V
Low consumption: max 6W (for an awning of 6m)

Set of LED's

For your safety in the dark, you have the option to equip your Omni-Step 12V with a set of LED's.
Suitable for all Omni-Steps from construction date July 2003. Not suitable for the slide-out 700.

Sealing rubber

Makes sure the gap between the vehicle and awning is closed when using a flat adapter.
lengths:
Small: 3,00m - 3,50m - 4,00m - roll of 30m
Large: roll of 30m

Omni-Gutter (Rainguard)

Multi purpose self adhesive rain gutter.
Fits most caravans and motorhomes.

Omni-Cleaner

Swift cleaning product for PVC awning fabric, in user-friendly spray bottle.
Protects thanks to a water-repellent, anti-static film.
Also suitable for other plastic materials.

Gives shine - Protects - Ecological

Protects against pollution thanks to a water-repellent and antistatic film
Gives shine to all kinds of plastic, coloured or white

Repair kit

Repair set for Omnistor PVC fabrics.

Curtains

An optional set of curtains is available in two different colours:

Bike-Cover

Door wheel